Menu

我的研华会员注册

「我的研华」为研华客户专属办事平台。成为研华会员,您将收到最新产品资讯、研究会邀请和线上市肆特殊优惠。

立即注册,启用您的会员办事!

注册

串口设备联网办事器

研华的串行设备办事器易于安装,撑持有线和无线网络,并且提供多种操作方式来知足3码3码19:30分公开验证需求。EKI-1000系列串口设备办事器可让RS-232/422/485 串口设备通过双网口连接至工业以太网网络。这些串口设备办事器通过以太网通讯协议为远程监控串行设备提供各种冗余配置和多路存取配置。此外,他们通过雄厚的运作模式完成各项需求,如虚拟串口(VCOM),TCP&UDP Server/Client等。

产品型录

  • RS-232/422/485到无线以太网串行设备办事器

    串行设备办事器能让 RS-232/RS-422/RS-485 串行设备以快速、具成本效益的方式,透过以太网络连接至主计算机。 由于无须在主计算机别的进行编程,因此能节省软件开发成本。 序列装配办事器稀奇适合透过以太网络以远程方式控制及监控您的序列装配,也适合与 RS-232/RS-422/RS-485 串行设备进行联机。

    • EKI-1511X

      The EKI-1511X and EKI-1512X are serial device servers which connect RS-422/485 serial devices, such as PLC, meters, and sensors to an IP-based Ethernet LAN. They allow nearly any device with serial ports to connect and share an Ethernet network. EKI-1511X and EKI-1512X provide various operation modes: COM port redirection (Virtual COM port), TCP server, TCP Client, and UDP mode. With COM port redirection mode, standard serial operation calls are transparently redirected to the EKI-1511X and EKI-1512X, guaranteeing compatibility with legacy serial devices and enabling backward compatibility with existing software. With TCP server, TCP client and UDP modes, the EKI-1511X and EKI-1512X ensure the compatibility of network software that uses a standard network API. Moreover you can make serial devices communicate with other devices peer-to-peer, without any intermediate host PCs and software programming. With a compact and slim IP30 metal case, EKI-1511X and EKI-1512X can be installed into a field cabinet easily. EKI-1511X and EKI-1512X provide terminal block connector for RS-422/485 that user can setup the physical wiring without any manually made connector. And with EMC level 3 protection, EKI-1511X and EKI-1512X can work in harsher working environments than other serial device servers.
    • EKI-1512X

      The EKI-1511X and EKI-1512X are serial device servers which connect RS-422/485 serial devices, such as PLC, meters, and sensors to an IP-based Ethernet LAN. They allow nearly any device with serial ports to connect and share an Ethernet network. EKI-1511X and EKI-1512X provide various operation modes: COM port redirection (Virtual COM port), TCP server, TCP Client, and UDP mode. With COM port redirection mode, standard serial operation calls are transparently redirected to the EKI-1511X and EKI-1512X, guaranteeing compatibility with legacy serial devices and enabling backward compatibility with existing software. With TCP server, TCP client and UDP modes, the EKI-1511X and EKI-1512X ensure  the compatibility of network software that uses a standard network API. Moreover you can make serial devices communicate with other devices peer-to-peer, without any intermediate host PCs and software programming. With a compact and slim IP30 metal case, EKI-1511X and EKI-1512X can be installed into a field cabinet easily. EKI-1511X and EKI-1512X provide terminal block connector for RS-422/485 that user can setup the physical wiring without any manually made connector. And with EMC level 3 protection, EKI-1511X and EKI-1512X can work in harsher working environments than other serial device servers.
    • EKI-1521

      1端口RS-232/422/485串口设备联网办事器
    • EKI-1521I

      1端口RS-232/422/485宽温串口设备办事器
    • EKI-1521CI

      1端口RS-232/422/485隔离宽温串口设备办事器
    • EKI-1522

      2 端口RS-232/422/485 串口设备联网办事器
    • EKI-1522I

      2 端口RS-232/422/485 宽温串口设备联网办事器
    • EKI-1522CI

      2 端口RS-232/422/485 隔离宽温串口设备联网办事器
    • EKI-1524

      4 端口RS-232/422/485 串口设备联网办事器
    • EKI-1524I

      4 端口RS-232/422/485宽温 串口设备联网办事器
    • EKI-1524CI

      4 端口RS-422/485隔离宽温 串口设备联网办事器
    • EKI-1526

      16端口RS-232/422/485串口设备联网办事器
    • EKI-1526I

      The EKI-1528 and EKI-1526 are industrial-grade network-based serial device servers for connecting up to 8 or 16 serial RS-232/422/485 devices, such as CNCs, PLCs, scales and scanners, directly to a TCP/IP network. The EKI-1528 and EKI-1526 feature two independent Ethernet ports and MAC addresses to provide a redundant network mechanism to guarantee Ethernet network reliability. The EKI-1528 and EKI-1526 provide a simple and cost-effective way to bring the advantages of remote management and data accessibility to thousand of devices that can't connect to an Ethernet network. The EKI-1528 and EKI-1526 offer multiple ways to configure through Windows utility, Web Browser, serial console or Telnet console, these methods make it easy manage many EKI-1528 and EKI-1526 or serial devices on your network.
    • EKI-1526T

      16端口RS-232/422/485串口设备联网办事器 w/ DC 输入
    • EKI-1526TI

      The EKI-1528 and EKI-1526 are industrial-grade network-based serial device servers for connecting up to 8 or 16 serial RS-232/422/485 devices, such as CNCs, PLCs, scales and scanners, directly to a TCP/IP network. The EKI-1528 and EKI-1526 feature two independent Ethernet ports and MAC addresses to provide a redundant network mechanism to guarantee Ethernet network reliability. The EKI-1528 and EKI-1526 provide a simple and cost-effective way to bring the advantages of remote management and data accessibility to thousand of devices that can't connect to an Ethernet network. The EKI-1528 and EKI-1526 offer multiple ways to configure through Windows utility, Web Browser, serial console or Telnet console, these methods make it easy manage many EKI-1528 and EKI-1526 or serial devices on your network.
    • EKI-1528

      8端口RS-232/422/485串口设备联网办事器
    • EKI-1528I

      The EKI-1528 and EKI-1526 are industrial-grade network-based serial device servers for connecting up to 8 or 16 serial RS-232/422/485 devices, such as CNCs, PLCs, scales and scanners, directly to a TCP/IP network. The EKI-1528 and EKI-1526 feature two independent Ethernet ports and MAC addresses to provide a redundant network mechanism to guarantee Ethernet network reliability. The EKI-1528 and EKI-1526 provide a simple and cost-effective way to bring the advantages of remote management and data accessibility to thousand of devices that can't connect to an Ethernet network. The EKI-1528 and EKI-1526 offer multiple ways to configure through Windows utility, Web Browser, serial console or Telnet console, these methods make it easy manage many EKI-1528 and EKI-1526 or serial devices on your network.
    • EKI-1528T

      8端口RS-232/422/485串口设备办事器 w/ DC输入
    • EKI-1528TI

      The EKI-1528 and EKI-1526 are industrial-grade network-based serial device servers for connecting up to 8 or 16 serial RS-232/422/485 devices, such as CNCs, PLCs, scales and scanners, directly to a TCP/IP network. The EKI-1528 and EKI-1526 feature two independent Ethernet ports and MAC addresses to provide a redundant network mechanism to guarantee Ethernet network reliability. The EKI-1528 and EKI-1526 provide a simple and cost-effective way to bring the advantages of remote management and data accessibility to thousand of devices that can't connect to an Ethernet network. The EKI-1528 and EKI-1526 offer multiple ways to configure through Windows utility, Web Browser, serial console or Telnet console, these methods make it easy manage many EKI-1528 and EKI-1526 or serial devices on your network.
    • EKI-1528I-DR

      The EKI-1528I and EKI-1528CI feature two independent Ethernet ports and MAC addresses to provide a redundant network mechanism to guarantee Ethernet network reliability. The EKI-1528I and EKI-1528CI are serial device servers that connect RS-232/422/485 serial devices, such as PLC, meters, sensors, and barcode reader to an IP-based Ethernet LAN. They allow nearly any device with serial ports to connect and share an Ethernet network. The EKI-1528I and EKI-1528CI provide various operations: COM port redirection (Virtual COMport), TCP Server, TCP Client and UDP mode. With COM port redirection mode, standard serial operation calls are transparently redirected to the EKI-1528I and EKI-1528CI, guaranteeing compatibility with legacy serial devices and enabling backward compatibility with existing software. With TCP server, TCP client, and UDP modes, EKI-1528I and EKI-1528CI ensure the compatibility of network software that uses a standard network API. Moreover, you can make serial devices communicate with other devices peer-to-peer, without any intermediate host PCs and software programming.
    • EKI-1528CI-DR

      The EKI-1528I and EKI-1528CI feature two independent Ethernet ports and MAC addresses to provide a redundant network mechanism to guarantee Ethernet network reliability. The EKI-1528I and EKI-1528CI are serial device servers that connect RS-232/422/485 serial devices, such as PLC, meters, sensors, and barcode reader to an IP-based Ethernet LAN. They allow nearly any device with serial ports to connect and share an Ethernet network. The EKI-1528I and EKI-1528CI provide various operations: COM port redirection (Virtual COMport), TCP Server, TCP Client and UDP mode. With COM port redirection mode, standard serial operation calls are transparently redirected to the EKI-1528I and EKI 1528CI, guaranteeing compatibility with legacy serial devices and enabling backward compatibility with existing software. With TCP server, TCP client, and UDP modes, EKI-1528I and EKI-1528CI ensure the compatibility of network software that uses a standard network API. Moreover, you can make serial devices communicate with other devices peer-to-peer, without any intermediate host PCs and software programming.
    • ADAM-4570

      2端口RS-232/422/485串口联网办事器
    • ADAM-4570L

      2端口RS-232串口设备联网办事器
    • ADAM-4571

      1端口RS-232/422/485串口设备联网办事器
    • ADAM-4571L

      1端口RS-232串口设备联网办事器
    • BB-VESR901

      以太网序列伺服器,(1) 序列 DB9 或 TB,(1) 10/100 以太网 RJ45
    • BB-VESR902D

      Take control of your serial devices with Vlinx? Model VESR902D Industrial Ethernet Serial Server. If it has a serial port, it can be monitored and controlled from anywhere on your Ethernet LAN or WAN. Keep it at maximum productivity without leaving your office. Even troubleshoot it from outside your LAN via the internet. The easy-to-use Vlinx? Manager software puts access to your entire factory floor on your desk. Configure devices, upgrade firmware and monitor activity. Configuration changes can also be made using a web browser. Heartbeat connectivity keeps the serial server online. If connectivity is lost, it attempts to reconnect every five seconds until connection is regained. A manual reboot is not needed when communications are restored.
    • BB-VESR902T

      Take control of your serial devices with Vlinx? Model VESR902T Industrial Ethernet Serial Server. If it has a serial port, it can be monitored and controlled from anywhere on your Ethernet LAN or WAN. Keep it at maximum productivity without leaving your office. Even troubleshoot it from outside your LAN via the internet. The easy-to-use Vlinx? Manager software puts access to your entire factory floor on your desk. Configure devices, upgrade firmware and monitor activity. Configuration changes can also be made using a web browser. Heartbeat connectivity keeps the serial server online. If connectivity is lost, it attempts to reconnect every five seconds until connection is regained. A manual reboot is not needed when communications are restored.
    • BB-VESR921

      Take control of your serial devices with Vlinx? Model VESR921 Industrial Ethernet Serial Server. If it has a serial port, it can be monitored and controlled from anywhere on your Ethernet LAN or WAN. Keep it at maximum productivity without leaving your office. Even troubleshoot it from outside your LAN via the internet. The easy-to-use Vlinx? Manager software puts access to your entire factory floor on your desk. Configure devices, upgrade firmware and monitor activity. Configuration changes can also be made using a web browser. Model VESR921 also features an additional copper RJ45 port that allows you to connect another Ethernet device or PC work-station. This pass-through port functions much like an unmanaged switch. Heartbeat connectivity keeps the serial server online. If connectivity is lost, it attempts to reconnect every five seconds until connection is regained. A manual reboot is not needed when communications are restored.
    • BB-VESR922T

      Take control of your serial devices with Vlinx? Model VESR922T Industrial Ethernet Serial Server. If it has a serial port, it can be monitored and controlled from anywhere on your Ethernet LAN or WAN. Keep it at maximum productivity without leaving your office. Even troubleshoot it from outside your LAN via the internet. The easy-to-use Vlinx? Manager software puts access to your entire factory floor on your desk. Configure devices, upgrade firmware and monitor activity. Configuration changes can also be made using a web browser. Model VESR922T also features an additional copper RJ45 port that allows you to connect another Ethernet device or PC work-station. This pass-through port functions much like an unmanaged switch. Heartbeat connectivity keeps the serial server online. If connectivity is lost, it attempts to reconnect every five seconds until connection is regained. A manual reboot is not needed when communications are restored.
    • BB-VESR921-MT

      VLINX, 1PORT, DB9, ESS, DIN, FIBER, MULTI, ST, CU
    • BB-VESR921-MC

      以太网序列伺服器,(1) 序列 DB9 或 TB,(1) 100BaseFX 多模式 SC,(1) 10/100 RJ45 以太网
    • BB-VESR321

      ISOLATED ESS (2) RJ45 ETHERNET, RS-232/422/485
    • BB-VESR424T

      VLINX, (2) RJ45 ETHERNET, (4) TB 232/422/485
    • BB-VESR424D

      VLINX, (2) RJ45 ETHERNET, (4) DB9 232/422/485
    • BB-VESP211

      1 端口小型序列伺服器,RS-232/422/485
    • BB-VESP211-485

      1 端口小型序列伺服器,RS-422/485
    • BB-VESP211-232

      1 端口小型序列伺服器,RS-232
    • BB-ESR901

      1 PORT ETH SERV DIN & WIDE POW
    • BB-ESR902

      2 PORT ETH SERV DIN & WIDE POW
    • BB-ESR904

      4 PORT ETH SERV DIN & WIDE POW
    • BB-ESP901

      IP SERIAL DEVICE SERVER
    • BB-ESP902

      1-RS-232/422/485 PORT, 1-RS232 PORT VILINX
    • BB-ESP904

      4 X 232/422/485PORT, 1X232PORT VLINX SERIAL SERVER
    • BB-ESP906CL

      ETHERNET SERIAL SERVER W/CL
  • Wireless Device Server

    Advantech’s wireless device server brings RS-232/422/485 to your WLAN or LAN. Allowing nearly any device with a serial port to be connected to and shared on a WLAN, our wireless device server provides a quick, simple, and cost-effective means of bringing the advantages of remote management and data accessibility to thousands of devices that would otherwise be unable to connect to a network. With our wireless device server, your existing serial devices can be used with the most popular operating systems on the market. There is no need to write special drivers for specific operating systems. Moreover, you can make serial devices communicate with other devices peer-to-peer, without any intermediate host PCs or software programming, which can save a considerable amount of cost and effort. You can also actively request data or issue commands from the RS-232/422/485 side or WLAN side, and data can be sent bilaterally. Thus, our wireless device server is particularly suitable for remote monitoring systems such as those used in security, factory automation, SCADA, transportation, and more.

    • EKI-1361

      1端口RS-232/422/485转802.11b/g/n 工业无线串口办事器
    • EKI-1361-MB

      EKI-1361 and EKI-1362 wireless serial device servers bring RS-232/422/485 to wireless LAN or LAN. They allow nearly any device with serial ports to connect and share an WLAN network. EKI-1361 and EKI-1362 provide a quick, simple and cost-effective way to bring the advantages of remote management and data accessibility to thousands of devices that cannot connect to a network. With EKI-1361 and EKI-1362, your existing serial devices can be used with the most popular operating systems on the market. There is no need to write special drivers for specific operating systems. Moreover, you can make serial devices communicate with other devices peer-to-peer, without any intermediate host PCs and software programming. That saves a lot of cost and effort. In addition, you can actively request data or issue commands from the RS-232/422/485 side or wireless LAN side. This data can be sent bilaterally. Thus, the EKI-1361 and EKI-1362 are especially suitable for remote monitoring environments such as security systems, factory automaton, SCADA, transportation and more.
    • EKI-1362

      2端口RS-232/422/485转802.11b/g/n 工业无线串口办事器
    • EKI-1362-MB

      EKI-1361 and EKI-1362 wireless serial device servers bring RS-232/422/485 to wireless LAN or LAN. They allow nearly any device with serial ports to connect and share an WLAN network. EKI-1361 and EKI-1362 provide a quick, simple and cost-effective way to bring the advantages of remote management and data accessibility to thousands of devices that cannot connect to a network. With EKI-1361 and EKI-1362, your existing serial devices can be used with the most popular operating systems on the market. There is no need to write special drivers for specific operating systems. Moreover, you can make serial devices communicate with other devices peer-to-peer, without any intermediate host PCs and software programming. That saves a lot of cost and effort. In addition, you can actively request data or issue commands from the RS-232/422/485 side or wireless LAN side. This data can be sent bilaterally. Thus, the EKI-1361 and EKI-1362 are especially suitable for remote monitoring environments such as security systems, factory automaton, SCADA, transportation and more.
    • BB-ABDN-SE-DP551

      ENTERPRISE WLAN SDS, 802.11A/B/G/N, RS232/422/485
    • BB-ABDN-SE-IN5410

      INDUSTRIAL WLAN SDS, 1 PORT TO 802.11A/B/G/N
    • BB-ABDN-SE-IN5420

      INDUSTRIAL WLAN SDS, 2 PORT TO 802.11A/B/G/N
  • Modbus 网关

    Modbus 串行设备办事器是作为 Modbus 串行设备与在以太网络上执行 Modbus/TCP 之计算机主机之间的接口。 Modbus串行设备办事器完整兼容于 Modbus/TCP,为您提供便利的解决方案,将执行 Modbus 序列通讯协议 (Modbus/ASCII 或 Modbus/RTU) 的现有装配或控制器联机至以太网络。

  • USB 串口设备联网办事器

    研华的USB串口设备联网办事器允许PC用户通过局域网连接串口设备至串口接口系统,例如USB监控,打印机及扫描仪。为了更进一步知足虚拟环境,USB-to-LAN串口设备办事器强化用户导向及效率的同时削减硬件要求及额外费用;立即将已连接的设备转换到你可通过网络访问的任何中央。其热插拔及总线供电等功能的撑持,我们的USB-to-LAN串口设备办事器防止了机器重启的延迟及各种状况,并不需要额外的电源供应。我们提供具有配套软件的热插拔USB设备办事器无需更多卡槽或IRQ地址设置,更为简便从远程扩充及分享你的USB设

相关资源

Contact Advantech

800-810-0345(座机)
400-810-0345(手机)

Contact Advantech